Advanced Heating & Air Conditioning Assessment
Price: $250 $150† (limited time only)
Is your equipment operating at optimum levels? Have a Current Energy experienced HVAC technician inspect your systems.
Assessment includes a 31-point inspection of up to three air conditioning units.
- Check condenser fan for proper function
- Check cleanliness and condition of condenser coils
- Inspect condensing unit contactor for proper function
- Inspect reversing valve for proper function (heat pump only)
- Verify liquid line pressure
- Verify suction line pressure
- Verify superheat temperature
- Verify condensing unit is running at proper amperage and voltage
- Check for proper function of crank-case heater
- Inspect high/low pressure switches (when present)
- Verify furnace unit is running at proper amperage and voltage
- Check operating speed of furnace
- Inspect heating element (electric system only)
- Inspect furnace unit contactor or control board for proper function
- Inspect blower wheel for cleanliness and balance
- Inspect evaporator coils
- Check condition of drain pan
- Determine Delta-T
- Measure entering and exiting wet bulb temperatures
- Inspect gas valve for proper function
- Inspect burner assembly for proper function
- Inspect condition of heat exchanger
- Inspect condition of flue pipe
- Check carbon monoxide levels (during heating season only)
- Check filters
- Check duct work for leakage and proper sizing (where accessible)
- Verify R-Value and proper installation of duct work
- Measure duct system external static pressure
- Measure airflow at each grille with an air capture hood
- Calculate real-time system BTU performance
- Calculate real-time effective system efficiency
Contact us today for more information or to schedule your Assessment.
† Price includes up to 3 A/C units. There will be a $100 per unit charge for each additional unit. ↑
Disclaimer Of Warranty And Limitation Of Liability
The home energy analysis is based on a series of engineering assumptions and or calculations contained in the software which may be used to calculate the house's efficiency. You acknowledge that Current Energy is not the manufacturer of the software or any installed product. CURRENT ENERGY DOES NOT WARRANTY THE CALCULATIONS OR ASSUMPTIONS CONTAINED IN THE SOFTWARE PROGRAM, NOR GUARANTEE ANY HOUSE WILL PERFORM AS STATED BY THE SOFTWARE. WE DO NOT WARRANTY ANY PRODUCT INSTALLED IN ANY HOUSE OR ANY SYSTEM ATTACHED OR INSTALLED IN CONJUNCTION WITH ANY PRODUCT IN ANY HOUSE INCLUDING, BUT NOT LIMITED TO, WINDOWS, DOORS, INSULATION, RADIANT BARRIERS, SHEATHING, WRAPS, SEALANTS, WATER HEATERS, HVAC SYSTEMS AND/OR APPLIANCES INSTALLED IN ANY HOUSE. CURRENT ENERGY MAKES NO WARRANTY OF FITNESS FOR ANY PARTICULAR USE OR PURPOSE, EITHER EXPRESS OR IMPLIED OF THE SERVICES AND GOODS. THE MAXIMUM LIABILITY INCURRED BY CURRENT ENERGY FOR ERRORS & OMISSIONS IN THE INSPECTION AND ANALYSIS, INCLUDING ANY INSPECTOR, RATER, OWNER OR EMPLOYEE, IF ANY, TO THE CLIENT SHALL BE LIMITED TO THE AMOUNT OF THE FEE PAID FOR THE INSPECTION AND ANALYSIS, NOT TO EXCEED $500.00. CURRENT ENERGY SHALL NOT BE LIABLE FOR ANY CLAIMS FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
